PartsTable
Technical Data Sheet
Download PDF

C310075C000 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C310075C000: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), locking_feature: PREVAILING TORQUE ALL METAL DESIGN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-417-8149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C310075C000
NSN: 5310-01-417-8149
FSC: 5310 — Nuts and Washers
CAGE: 98523 — JERED LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
width_across_flats1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch10
NSN5310-01-417-8149
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C310075C000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.427 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH10
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
5310PL0778524Reference document
Same NSN cross-reference
Reference document — Informative reference only
H20065C001 ITEM 133Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C310075C000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C310075C000?
C310075C000 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace C310075C000?
There are 2 known substitutes for C310075C000: 5310PL0778524, H20065C001 ITEM 133. Substitute compatibility should be verified for your specific system.
What is the NSN for C310075C000?
C310075C000 is cataloged in the U.S. Government catalog under NSN 5310-01-417-8149. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C310075C000