PartsTable
Technical Data Sheet
Download PDF

C3064F5-35 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C3064F5-35: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-845-4809, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C3064F5-35
NSN: 5340-00-845-4809
FSC: 5340 — Hardware, Commercial
CAGE: 78553 — TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.233 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.812 INCHES NOMINAL IN
NSN5340-00-845-4809
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C3064F5-35 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.233 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.203 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.233 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.812 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
MATERIALRUBBER SYNTHETIC CUSHION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
A3064F5-35Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy C3064F5-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C3064F5-35?
C3064F5-35 is a CLAMP,LOOP.
What parts can replace C3064F5-35?
There is 1 known substitute for C3064F5-35: A3064F5-35. Substitute compatibility should be verified for your specific system.
What is the NSN for C3064F5-35?
C3064F5-35 is cataloged in the U.S. Government catalog under NSN 5340-00-845-4809. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C3064F5-35