PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C3062-8
C3062-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include color: RED, material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 2.625 INCHES NOMINAL IN, center_hole_diameter: 2.188 INCHES NOMINAL IN, cross-sectional_height: 0.218 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-106-1981, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C3062-8
NSN: 5330-00-106-1981
FSC: 5330
CAGE: 65456 — WOODS T B INC (USA)
SPECIFICATIONS
colorRED
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter2.625 INCHES NOMINAL IN
center_hole_diameter2.188 INCHES NOMINAL IN
cross-sectional_height0.218 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-106-1981
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C3062-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COLOR: RED
•
CROSS-SECTIONAL HEIGHT: 0.218 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE DIAMETER: 2.188 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
COLORRED
CROSS-SECTIONAL HEIGHT0.218 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER2.188 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
114342AInterchangeable
interchangeable cross-reference
interchangeable
279951Interchangeable
interchangeable cross-reference
interchangeable
1N350819C91Interchangeable
interchangeable cross-reference
interchangeable
W2528BW2529AInterchangeable
interchangeable cross-reference
interchangeable
83438Interchangeable
interchangeable cross-reference
interchangeable
83438ALLInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C3062-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C3062-8?
C3062-8 is a PACKING,PREFORMED.
What parts can replace C3062-8?
There are 7 known substitutes for C3062-8: 114342A, 279951, 1N350819C91 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C3062-8?
C3062-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-106-1981. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C3062-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026