PartsTable
Technical Data Sheet
Download PDF

C300-906-41 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C300-906-41: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.128 INCHES NOMINAL IN, material: STEEL COMP 302 OVERALL, overall_width: 0.250 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.037 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-351-5375, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C300-906-41
NSN: 5340-01-351-5375
FSC: 5340 — Hardware, Commercial
CAGE: 33714 — ENVIRONMENTAL TECTONICS CORP (USA)
SPECIFICATIONS
diameter0.128 INCHES NOMINAL IN
materialSTEEL COMP 302 OVERALL
overall_width0.250 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.037 INCHES NOMINAL IN
loop_inside_diameter0.312 INCHES NOMINAL IN
end_item_identification6530-00-926-2151
purchase_description_identification33714-C300-906-41
distance_from_loop_center_to_tongue_end0.437 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.406 INCHES NOMINAL IN
NSN5340-01-351-5375
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C300-906-41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.128 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.037 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.437 INCHES NOMINAL IN
•
PURCHASE DESCRIPTION IDENTIFICATION: 33714-C300-906-41
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.128 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.037 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.437 INCHES NOMINAL IN
PURCHASE DESCRIPTION IDENTIFICATION33714-C300-906-41
END ITEM IDENTIFICATION6530-00-926-2151
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.406 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C300-906-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C300-906-41?
C300-906-41 is a CLAMP,LOOP.
What is the NSN for C300-906-41?
C300-906-41 is cataloged in the U.S. Government catalog under NSN 5340-01-351-5375. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C300-906-41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.