PartsTable
Technical Data Sheet
Download PDF

C2950-8 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C2950-8: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, lubrication: SOLUBLE LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-917-6360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C2950-8
NSN: 5310-00-917-6360
FSC: 5310 — Nuts and Washers
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
lubricationSOLUBLE LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNF
overall_height0.230 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
NSN5310-00-917-6360
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C2950-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: SOLUBLE LUBRICANT
•
WASHER OUTSIDE DIAMETER: 0.425 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS
LUBRICATIONSOLUBLE LUBRICANT
OVERALL HEIGHT0.230 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.425 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.274 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
LH8314-048Reference document
Same NSN cross-reference
Reference document — Secondary reference
H530-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C2950-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2950-8?
C2950-8 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace C2950-8?
There are 2 known substitutes for C2950-8: LH8314-048, H530-4. Substitute compatibility should be verified for your specific system.
What is the NSN for C2950-8?
C2950-8 is cataloged in the U.S. Government catalog under NSN 5310-00-917-6360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2950-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.