PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C294111-1
C294111-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, lug_width: 0.250 INCHES NOMINAL IN, overall_width: 1.468 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, lug_hole_diameter: 0.199 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-074-4552, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C294111-1
NSN: 5340-00-074-4552
FSC: 5340
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
lug_width0.250 INCHES NOMINAL IN
overall_width1.468 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.984 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.750 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.734 INCHES NOMINAL IN
NSN5340-00-074-4552
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C294111-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.984 INCHES NOMINAL IN
•
LUG WIDTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
LUG HOLE DIAMETER: 0.199 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.984 INCHES NOMINAL IN
LUG WIDTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
DIAMETER0.199 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH1.468 INCHES NOMINAL IN
MATERIALALUMINUM BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
2UU0-161Interchangeable
interchangeable cross-reference
interchangeable
17185BInterchangeable
interchangeable cross-reference
interchangeable
17185CInterchangeable
interchangeable cross-reference
interchangeable
454874W37Interchangeable
interchangeable cross-reference
interchangeable
454874Interchangeable
interchangeable cross-reference
interchangeable
21962Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C294111-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C294111-1?
C294111-1 is a CLAMP,LOOP.
What parts can replace C294111-1?
There are 13 known substitutes for C294111-1: 2UU0-161, 17185B, 17185C and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C294111-1?
C294111-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-074-4552. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C294111-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026