PartsTable
Technical Data Sheet
Download PDF

C2936BE3 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C2936BE3: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, bore_diameter: 1.8120 INCHES MINIMUM AND 1.8130 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-237-1976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C2936BE3
NSN: 3110-01-237-1976
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter1.8120 INCHES MINIMUM AND 1.8130 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
outer_ring_width0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter2.2492 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodSTAMPED
NSN3110-01-237-1976
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C2936BE3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: STAMPED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 2.2492 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODSTAMPED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.2450 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER2.2492 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
BORE DIAMETER1.8120 INCHES MINIMUM AND 1.8130 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
AJ-9800-72-7Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
TCFS29-36Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C2936BE3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2936BE3?
C2936BE3 is a BEARING,BALL,ANNULAR.
What parts can replace C2936BE3?
There are 2 known substitutes for C2936BE3: AJ-9800-72-7, TCFS29-36. Substitute compatibility should be verified for your specific system.
What is the NSN for C2936BE3?
C2936BE3 is cataloged in the U.S. Government catalog under NSN 3110-01-237-1976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2936BE3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.