PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C2874D17
C2874D17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: PLASTIC TETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: COLOR,BROWN, style_designator: OFFSET MOUNT, surface_treatment: ANODIZE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C2874D17
NSN: 5340-00-054-1074
FSC: 5340
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
diameter0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialPLASTIC TETRAFLUOROETHYLENE CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresCOLOR,BROWN
style_designatorOFFSET MOUNT
surface_treatmentANODIZE BAND
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
loop_inside_diameter1.063 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.146 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.928 INCHES NOMINAL IN
NSN5340-00-054-1074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C2874D17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.146 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.928 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.063 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END1.146 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.928 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.063 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
SPECIAL FEATURESCOLOR,BROWN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
SS845-2110223ASSYBInterchangeable
interchangeable cross-reference
interchangeable
47717ASSYB 1-4INInterchangeable
interchangeable cross-reference
interchangeable
SS845-2110223Interchangeable
interchangeable cross-reference
interchangeable
4771-7Interchangeable
interchangeable cross-reference
interchangeable
10803-25 ITEM 11Interchangeable
interchangeable cross-reference
interchangeable
430988Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C2874D17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2874D17?
C2874D17 is a CLAMP,LOOP.
What parts can replace C2874D17?
There are 12 known substitutes for C2874D17: SS845-2110223ASSYB, 47717ASSYB 1-4IN, SS845-2110223 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C2874D17?
C2874D17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2874D17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026