PartsTable
Technical Data Sheet
Download PDF

C25499 — SEAL,STRAPPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C25499: SEAL,STRAPPING.

The SEAL,STRAPPING is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, design_type: OPEN, sealing_tool_name: .BAND-IT TOOL, surface_treatment: PASSIVATE, sealing_tool_model_number: NONE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-244-7325, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C25499
NSN: 5340-00-244-7325
FSC: 5340 — Hardware, Commercial
CAGE: ZD484 — BLACKWOOD J. BLACKWOOD & SON PTY LTD (AUS)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
design_typeOPEN
sealing_tool_name.BAND-IT TOOL
surface_treatmentPASSIVATE
sealing_tool_model_numberNONE
stretching/sealing_machine_name.NONE
strapping_type_for_which_designedSTEEL
strapping_width_for_which_designed0.500 INCHES NOMINAL IN
sealing_equipment_for_which_designedSEALING TOOL OR STRETCHING/SEALING MACHINE
stretching/sealing_machine_model_numberNONE
NSN5340-00-244-7325
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C25499 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STRETCHING/SEALING MACHINE NAME: .NONE
•
STRAPPING WIDTH FOR WHICH DESIGNED: 0.500 INCHES NOMINAL IN
•
SEALING TOOL NAME: .BAND-IT TOOL
•
STRAPPING TYPE FOR WHICH DESIGNED: STEEL
•
SEALING TOOL MODEL NUMBER: NONE
•
SEALING EQUIPMENT FOR WHICH DESIGNED: SEALING TOOL OR STRETCHING/SEALING MACHINE
•
DESIGN TYPE: OPEN
•
EARS: INCLUDED
TECHNICAL CHARACTERISTICS
STRETCHING/SEALING MACHINE NAME.NONE
STRAPPING WIDTH FOR WHICH DESIGNED0.500 INCHES NOMINAL IN
SEALING TOOL NAME.BAND-IT TOOL
STRAPPING TYPE FOR WHICH DESIGNEDSTEEL
SEALING TOOL MODEL NUMBERNONE
SEALING EQUIPMENT FOR WHICH DESIGNEDSEALING TOOL OR STRETCHING/SEALING MACHINE
DESIGN TYPEOPEN
EARSINCLUDED
SURFACE TREATMENTPASSIVATE
WIDTH0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
04248101Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MC254Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MCD4122ITEM5Reference document
Same NSN cross-reference
Reference document — Secondary reference
C-154Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy C25499?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C25499?
C25499 is a SEAL,STRAPPING.
What parts can replace C25499?
There are 4 known substitutes for C25499: 04248101, MC254, MCD4122ITEM5 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C25499?
C25499 is cataloged in the U.S. Government catalog under NSN 5340-00-244-7325. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C25499