PartsTable
Technical Data Sheet
Download PDF

C2411-13 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C2411-13: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.334 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OR ZINC OVERALL, material_thickness: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-043-2226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C2411-13
NSN: 5310-00-043-2226
FSC: 5310 — Nuts and Washers
CAGE: 87405 — FACET (OKLAHOMA) LLC (USA)
SPECIFICATIONS
hole_diameter0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.334 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
nondefinitive_spec/std_data2 STYLE AND A CLASS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5310-00-043-2226
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C2411-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.334 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND A CLASS
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.334 INCHES MAXIMUM IN
MATERIAL THICKNESS0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 STYLE AND A CLASS
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HOLE DIAMETER0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
432226Reference document
Same NSN cross-reference
Reference document — Secondary reference
23111-99-0410Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
25704-281200-33-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
N405P39BReference document
Same NSN cross-reference
Reference document — Secondary reference
FFW84CLASSASTYLE2Reference document
Same NSN cross-reference
Reference document — Identification reference
5310PL0563057Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy C2411-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2411-13?
C2411-13 is a WASHER,LOCK.
What parts can replace C2411-13?
There are 7 known substitutes for C2411-13: 432226, 23111-99-0410, 25704-281200-33-0 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C2411-13?
C2411-13 is cataloged in the U.S. Government catalog under NSN 5310-00-043-2226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2411-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.