PartsTable
Technical Data Sheet
C234587-2 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: TWO-PIECE, outside_diameter: 0.375 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.040 INCHES NOMINAL IN, packing_inside_diameter: 0.128 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-221-1674, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C234587-2
NSN: 5330-00-221-1674
FSC: 5330
CAGE: 06845 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
materialSTEEL RETAINER
constructionTWO-PIECE
outside_diameter0.375 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.040 INCHES NOMINAL IN
packing_inside_diameter0.128 INCHES NOMINAL IN
retainer_inside_diameter0.224 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.050 INCHES NOMINAL IN
NSN5330-00-221-1674
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C234587-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CONSTRUCTION: TWO-PIECE
MATERIAL: RUBBER SYNTHETIC PACKING
OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
SURFACE TREATMENT: CADMIUM RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER: 0.050 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER: 0.224 INCHES NOMINAL IN
PACKING INSIDE DIAMETER: 0.128 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONSTRUCTIONTWO-PIECE
MATERIALRUBBER SYNTHETIC PACKING
OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
SURFACE TREATMENTCADMIUM RETAINER
PACKING RING CROSS-SECTIONAL DIAMETER0.050 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER0.224 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.128 INCHES NOMINAL IN
RETAINER THICKNESS0.040 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
252AInterchangeable
interchangeable cross-reference
interchangeable
D624-127APCT11Interchangeable
interchangeable cross-reference
interchangeable
8701246-80Interchangeable
interchangeable cross-reference
interchangeable
800-001-6Interchangeable
interchangeable cross-reference
interchangeable
54B6805H03Interchangeable
Same NIIN cross-reference
interchangeable
C234587-2REVBInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy C234587-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C234587-2?
C234587-2 is a PACKING WITH RETAINER.
What parts can replace C234587-2?
There are 6 known substitutes for C234587-2: 252A, D624-127APCT11, 8701246-80 and 3 more. Substitute compatibility should be verified for your specific system.
Is C234587-2 still available?
C234587-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C234587-2