PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C22964AJITEM1
C22964AJITEM1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

BEARING,ROLLER,RADIAL AND THRUST. Key specifications include material: STEEL OUTER RING, overall_width: 2.7490 INCHES NOMINAL IN, style_designator: ROLLER, RADIAL AND THRUST, largest_bore_diameter: 8.7500 INCHES NOMINAL IN, bore_smallest_diameter: 8.0000 INCHES NOMINAL IN, outer_ring_outside_diameter: 14.6280 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-4915, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C22964AJITEM1
NSN: 3110-00-227-4915
FSC: 3110
CAGE: 81600 — NEW YORK NAVAL SHIPYARD NAVAL BASE (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
overall_width2.7490 INCHES NOMINAL IN
style_designatorROLLER, RADIAL AND THRUST
largest_bore_diameter8.7500 INCHES NOMINAL IN
bore_smallest_diameter8.0000 INCHES NOMINAL IN
outer_ring_outside_diameter14.6280 INCHES NOMINAL IN
thrust_unit_outside_diameter12.3770 INCHES NOMINAL IN
NSN3110-00-227-4915
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C22964AJITEM1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGEST BORE DIAMETER: 8.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL ROLLER
•
STYLE DESIGNATOR: ROLLER, RADIAL AND THRUST
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESRADIAL UNIT HAS 1 LIP OUTER RING AND CYLINDRICAL INNER RING WITH 3 SLOTS 0.3750 IN. BY 45 DEG. BY 0.3150 IN. W,120 DEG APARTON FACE OF INNER RING,L SHAPED RETAINER IN THRUST UNIT HAS OD OF 13.5000 IN. IN
LARGEST BORE DIAMETER8.7500 INCHES NOMINAL IN
MATERIALSTEEL ROLLER
MATERIALSTEEL WASHER
MATERIALSTEEL OUTER RING
MATERIALCOPPER ALLOY RETAINER
MATERIALCOPPER ALLOY THRUST RETAINER
STYLE DESIGNATORROLLER, RADIAL AND THRUST
MATERIALSTEEL INNER RING
OVERALL WIDTH2.7490 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
3485Interchangeable
interchangeable cross-reference
interchangeable
219-1469Interchangeable
interchangeable cross-reference
interchangeable
2982Interchangeable
interchangeable cross-reference
interchangeable
17106Interchangeable
interchangeable cross-reference
interchangeable
17106ADXInterchangeable
interchangeable cross-reference
interchangeable
0079458Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C22964AJITEM1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C22964AJITEM1?
C22964AJITEM1 is a BEARING,ROLLER,RADIAL AND THRUST.
What parts can replace C22964AJITEM1?
There are 27 known substitutes for C22964AJITEM1: 3485, 219-1469, 2982 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C22964AJITEM1?
C22964AJITEM1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-4915. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C22964AJITEM1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026