PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C2024
C2024 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RECTIFIER,METALLIC is a the manufacturer industrial component. Key specifications include material: SELENIUM, load_type: RESISTIVE, nut_style: HEXAGON, nut_height: 0.734 INCHES NOMINAL IN, temp_rating: 35.0 CELSIUS DEGC, thread_class: 2B. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-429-7607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C2024
NSN: 5310-00-429-7607
FSC: 5310
CAGE: 30418 — THOR POWER TOOL CO SUB OF STEWART-WARNER CO (USA)
SPECIFICATIONS
materialSELENIUM
load_typeRESISTIVE
nut_styleHEXAGON
nut_height0.734 INCHES NOMINAL IN
temp_rating35.0 CELSIUS DEGC
thread_class2B
overall_width3.000 INCHES NOMINAL IN
terminal_typeSOLDER LUG
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height3.000 INCHES NOMINAL IN
overall_length7.312 INCHES NOMINAL IN
stack_quantity1
NSN5310-00-429-7607
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C2024 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
BEARING SURFACE TYPE: FLAT
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
THREAD QUANTITY PER INCH: 10
•
NUT STYLE: HEXAGON
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
BEARING SURFACE TYPEFLAT
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.750 INCHES IN
THREAD QUANTITY PER INCH10
NUT STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.734 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
K26B5TN1Interchangeable
interchangeable cross-reference
interchangeable
C2024Interchangeable
interchangeable cross-reference
interchangeable
55-414REVAITEM27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C2024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2024?
C2024 is a RECTIFIER,METALLIC.
What parts can replace C2024?
There are 3 known substitutes for C2024: K26B5TN1, C2024, 55-414REVAITEM27. Substitute compatibility should be verified for your specific system.
What is the NSN for C2024?
C2024 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-429-7607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2024

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026