PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C200084405
C200084405 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440A OUTER RING A, bore_diameter: 1.4997 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, overall_width: 0.1700 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, special_features: INTERNAL PRELOAD 1 TO 2 LBS,DB LOADED; ELECTRO-ETCH OD FOR PRELOAD; PAIR OF BEARINGS GROUND FOR DUPLEX MOUNTING LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-108-2571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C200084405
NSN: 3110-01-108-2571
FSC: 3110
CAGE: 88818 — KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 440A OUTER RING A
bore_diameter1.4997 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
overall_width0.1700 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresINTERNAL PRELOAD 1 TO 2 LBS,DB LOADED; ELECTRO-ETCH OD FOR PRELOAD; PAIR OF BEARINGS GROUND FOR DUPLEX MOUNTING LBS
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
overall_outside_diameter1.7496 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
lubrication_material_document_and_classificationMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-108-2571
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C200084405 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE RETAINER
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 1.7496 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE RETAINER
MATERIALSTEEL COMP 440A INNER RING A
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
SPECIAL FEATURESINTERNAL PRELOAD 1 TO 2 LBS,DB LOADED; ELECTRO-ETCH OD FOR PRELOAD; PAIR OF BEARINGS GROUND FOR DUPLEX MOUNTING LBS
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER1.7496 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440A OUTER RING A
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
BORE DIAMETER1.4997 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
MATERIALOIL LUBRICATING LUBRICATION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
12-70601Interchangeable
interchangeable cross-reference
interchangeable
4-706Interchangeable
interchangeable cross-reference
interchangeable
11178131Interchangeable
interchangeable cross-reference
interchangeable
H65354Interchangeable
interchangeable cross-reference
interchangeable
65354Interchangeable
interchangeable cross-reference
interchangeable
25304Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C200084405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C200084405?
C200084405 is a BEARING,BALL,DUPLEX.
What parts can replace C200084405?
There are 19 known substitutes for C200084405: 12-70601, 4-706, 11178131 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C200084405?
C200084405 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-108-2571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C200084405

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026