PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C2-M
C2-M ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR COPPER ALLOY LOCATION NOT OTHERWISE SPECIFIED, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 1.375 INCHES NOMINAL IN, special_features: HAND-HELD INSPECTION MIRROR, GLASS, 2-1/4 INCH DIAMETER, 2X MAGNIFICATION, 7 INCH-11 INCH LONG HANDLE. IN, surface_treatment: CADMIUM OR CHROMATE, material_thickness: 0.060 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-248-6410, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C2-M
NSN: 5340-00-248-6410
FSC: 5340
CAGE: 06229 — WIELAND INC (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR COPPER ALLOY LOCATION NOT OTHERWISE SPECIFIED
overall_width0.625 INCHES NOMINAL IN
overall_length1.375 INCHES NOMINAL IN
special_featuresHAND-HELD INSPECTION MIRROR, GLASS, 2-1/4 INCH DIAMETER, 2X MAGNIFICATION, 7 INCH-11 INCH LONG HANDLE. IN
surface_treatmentCADMIUM OR CHROMATE
material_thickness0.060 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyINSPECTION MIRROR
NSN5340-00-248-6410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C2-M MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR COPPER ALLOY LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: CADMIUM OR CHROMATE
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR COPPER ALLOY LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTCADMIUM OR CHROMATE
OVERALL WIDTH0.625 INCHES NOMINAL IN
OVERALL LENGTH1.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
H13MInterchangeable
interchangeable cross-reference
interchangeable
88-11900Interchangeable
interchangeable cross-reference
interchangeable
C-2MInterchangeable
interchangeable cross-reference
interchangeable
1017T23Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C2-M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2-M?
C2-M is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace C2-M?
There are 4 known substitutes for C2-M: H13M, 88-11900, C-2M and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C2-M?
C2-M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-248-6410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2-M

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026