PartsTable
Technical Data Sheet
Download PDF

C2-90-102-103M — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

C2-90-102-103M: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.877 INCHES NOMINAL IN, shaft_style: ROUND, STEPPED, shaft_length: 1.125 INCHES NOMINAL IN, actuator_type: DUAL CONCENTRIC, body_diameter: 0.938 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-283-6452, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C2-90-102-103M
NSN: 5905-00-283-6452
FSC: 5905 — Resistor
CAGE: 34263 — CTS CORP IN TEXAS DBA CTS ELECTRONICS CORP BROWNSVILLE DIV (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.877 INCHES NOMINAL IN
shaft_styleROUND, STEPPED
shaft_length1.125 INCHES NOMINAL IN
actuator_typeDUAL CONCENTRIC
body_diameter0.938 INCHES MAXIMUM IN
shaft_diameter0.265 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
undercut_length0.438 INCHES NOMINAL IN
section_quantity2
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
undercut_diameter0.187 INCHES NOMINAL IN
NSN5905-00-283-6452
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN C2-90-102-103M MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
BODY DIAMETER: 0.938 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
UNDERCUT LENGTH: 0.438 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE PER SECTION: 1.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 ALL SECTIONS
•
SECTION QUANTITY: 2
•
SHAFT DIAMETER: 0.265 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.938 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
UNDERCUT LENGTH0.438 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS 1ST SECTION AND 10.0 KILOHMS 2ND SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 ALL SECTIONS
SECTION QUANTITY2
SHAFT DIAMETER0.265 INCHES NOMINAL IN
UNDERCUT DIAMETER0.187 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.438 INCHES NOMINAL IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
SUBSTITUTES & CROSS-REFERENCES 1
130-1111Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy C2-90-102-103M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C2-90-102-103M?
C2-90-102-103M is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace C2-90-102-103M?
There is 1 known substitute for C2-90-102-103M: 130-1111. Substitute compatibility should be verified for your specific system.
What is the NSN for C2-90-102-103M?
C2-90-102-103M is cataloged in the U.S. Government catalog under NSN 5905-00-283-6452. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C2-90-102-103M

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.