PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C1DZ7580A
C1DZ7580A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include alignment_type: RIGID, overall_height: 0.6820 INCHES MAXIMUM IN, surface_finish: GROUND, overall_outside_diameter: 2.7350 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM IN, retainer_fabrication_method: PRESSED, thrust_directional_capability_designation: SINGLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6196, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C1DZ7580A
NSN: 3110-00-158-6196
FSC: 3110
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
alignment_typeRIGID
overall_height0.6820 INCHES MAXIMUM IN
surface_finishGROUND
overall_outside_diameter2.7350 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
thrust_directional_capability_designationSINGLE
NSN3110-00-158-6196
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C1DZ7580A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.7350 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
RETAINER FABRICATION METHOD: PRESSED
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.7350 INCHES MINIMUM AND 2.7650 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
RETAINER FABRICATION METHODPRESSED
OVERALL HEIGHT0.6820 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
6048Interchangeable
interchangeable cross-reference
interchangeable
MILC39012-33Interchangeable
interchangeable cross-reference
interchangeable
M39012/33-0001Interchangeable
interchangeable cross-reference
interchangeable
10A7292Interchangeable
interchangeable cross-reference
interchangeable
45733Interchangeable
interchangeable cross-reference
interchangeable
8530BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C1DZ7580A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C1DZ7580A?
C1DZ7580A is a BEARING,BALL,THRUST.
What parts can replace C1DZ7580A?
There are 24 known substitutes for C1DZ7580A: 6048, MILC39012-33, M39012/33-0001 and 21 more. Substitute compatibility should be verified for your specific system.
Is C1DZ7580A still available?
C1DZ7580A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C1DZ7580A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026