PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C192
C192 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The LINING,FRICTION is a the manufacturer industrial component. Key specifications include width: 2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM IN, material: COPPER ALLOY OVERALL, thickness: 0.188 INCHES NOMINAL IN, lining_style: RECTANGULAR BLOCK PLAIN, hole_diameter: 0.139 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN, overall_height: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-198-9315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C192
NSN: 5310-00-198-9315
FSC: 5310
CAGE: 57771 — EDWIN B. STIMPSON COMPANY, INC. DBA STIMPSON (USA)
SPECIFICATIONS
width2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM IN
materialCOPPER ALLOY OVERALL
thickness0.188 INCHES NOMINAL IN
lining_styleRECTANGULAR BLOCK PLAIN
hole_diameter0.139 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
overall_height0.094 INCHES NOMINAL IN
overall_length38.625 INCHES MINIMUM AND 38.875 INCHES MAXIMUM IN
application_typeDRY
outside_diameter0.438 INCHES NOMINAL IN
style_designatorFINISHING
features_providedFLEXIBLE FRICTION LINING
surface_treatmentNICKEL OVERALL
NSN5310-00-198-9315
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C192 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.442 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FINISHING
•
HOLE DIAMETER: 0.179 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
MATERIAL: STEEL OR COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.442 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
STYLE DESIGNATORFINISHING
OVERALL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
HOLE DIAMETER0.179 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
MATERIAL THICKNESS0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
MATERIALSTEEL OR COPPER ALLOY OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
C192Interchangeable
interchangeable cross-reference
interchangeable
17454Interchangeable
interchangeable cross-reference
interchangeable
G386C6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C192?
C192 is a LINING,FRICTION.
What parts can replace C192?
There are 3 known substitutes for C192: C192, 17454, G386C6. Substitute compatibility should be verified for your specific system.
What is the NSN for C192?
C192 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-198-9315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C192

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026