PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C1733
C1733 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The ADAPTER,AIRCRAFT JACKING POINT is a the manufacturer industrial component. Key specifications include material: RUBBER, head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.344 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 1.063 INCHES NOMINAL IN, hole_diameter: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-424-0551, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C1733
NSN: 5306-00-424-0551
FSC: 5306
CAGE: 35311 — AMERICAN STANDARD INC WESTINGHOUSE AIR BRAKE CO DIV (USA)
SPECIFICATIONS
materialRUBBER
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.344 INCHES NOMINAL IN
thread_class2A A
head_diameter1.063 INCHES NOMINAL IN
hole_diameter0.125 INCHES NOMINAL IN
thread_length1.250 INCHES MINIMUM IN
overall_height0.250 INCHES NOMINAL IN
fastener_length2.250 INCHES NOMINAL IN
hardness_rating20.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
overall_diameter1.500 INCHES NOMINAL IN
special_featuresFURNISHED W/1 HEX NUT
NSN5306-00-424-0551
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C1733 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.344 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
THREAD QUANTITY PER INCH: 11
•
THREAD LENGTH: 1.250 INCHES MINIMUM IN
•
HARDNESS RATING: 20.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
COUNTERSINK ANGLE: 80.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.344 INCHES NOMINAL IN
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD QUANTITY PER INCH11
THREAD LENGTH1.250 INCHES MINIMUM IN
HARDNESS RATING20.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
COUNTERSINK ANGLE80.0 DEGREES NOMINAL
FASTENER LENGTH2.250 INCHES NOMINAL IN
FEATURES PROVIDEDFINISHED HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
R116Upgraded Successor
successor cross-reference
successor
C1733Upgraded Successor
successor cross-reference
successor
SD5507-1Interchangeable
interchangeable cross-reference
interchangeable
1730AC1001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C1733?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C1733?
C1733 is a ADAPTER,AIRCRAFT JACKING POINT.
What parts can replace C1733?
There are 4 known substitutes for C1733: R116, C1733, SD5507-1 and 1 more. Substitute compatibility should be verified for your specific system.
Is C1733 still available?
C1733 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C1733

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026