PartsTable
Technical Data Sheet
Download PDF

C15908 — DRILL,TWIST

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

C15908: DRILL,TWIST.

The DRILL,TWIST is a the manufacturer industrial component. Key specifications include material: STEEL ALLOY OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 0.812 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-01-399-0748, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C15908
NSN: 5133-01-399-0748
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 1NEX4 — KENNAMETAL INC. DIV KENNAMETAL INDUSTRIAL PRODUCTS GROUP (USA)
SPECIFICATIONS
materialSTEEL ALLOY OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.812 INCHES NOMINAL IN
flute_quantity2
overall_length2.500 INCHES NOMINAL IN
shank_diameter0.106 INCHES NOMINAL IN
special_featuresJOBBERS LG; SCREW MACHINE FLUTE LG; WIRE SIZE 36
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.1065 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5133-01-399-0748
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available DRILL,TWIST TITLE COMPONENT PN C15908 MFR DRILL,TWIST
KEY FEATURES
•
SHANK DIAMETER: 0.106 INCHES NOMINAL IN
•
CUTTING END STYLE: GENERAL PURPOSE
•
FLUTE LENGTH: 0.812 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.1065 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: D TYPE
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.106 INCHES NOMINAL IN
CUTTING END STYLEGENERAL PURPOSE
FLUTE LENGTH0.812 INCHES NOMINAL IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.1065 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS907 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATAD TYPE
SHANK STYLESTRAIGHT ROUND
FLUTE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 4
NAS907 TYDReference document
Same NSN cross-reference
Reference document — Secondary reference
NAS907Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
3780 36Reference document
Same NSN cross-reference
Reference document — Secondary reference
15908Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C15908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C15908?
C15908 is a DRILL,TWIST.
What parts can replace C15908?
There are 4 known substitutes for C15908: NAS907 TYD, NAS907, 3780 36 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C15908?
C15908 is cataloged in the U.S. Government catalog under NSN 5133-01-399-0748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C15908

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.