PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C1394BNPC10
C1394BNPC10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.313 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-4496, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C1394BNPC10
NSN: 5310-00-011-4496
FSC: 5310
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.313 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.750 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch20
nondefinitive_spec/std_dataA TYPE
NSN5310-00-011-4496
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C1394BNPC10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: HEXAGON
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLEHEXAGON
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH20
THREAD SERIESUNF
NOMINAL THREAD SIZE0.500 INCHES IN
WIDTH ACROSS FLATS0.750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.313 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
122295Interchangeable
interchangeable cross-reference
interchangeable
114496Interchangeable
interchangeable cross-reference
interchangeable
114496-003Interchangeable
interchangeable cross-reference
interchangeable
136493Interchangeable
interchangeable cross-reference
interchangeable
5310PL0578660Interchangeable
interchangeable cross-reference
interchangeable
373-0003-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C1394BNPC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C1394BNPC10?
C1394BNPC10 is a NUT,PLAIN,HEXAGON.
What parts can replace C1394BNPC10?
There are 20 known substitutes for C1394BNPC10: 122295, 114496, 114496-003 and 17 more. Substitute compatibility should be verified for your specific system.
Is C1394BNPC10 still available?
C1394BNPC10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C1394BNPC10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026