PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C13775
C13775 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, joint_style: VERTICAL JOINT, inside_diameter: 1.000 INCHES NOMINAL IN, outside_diameter: 1.375 INCHES NOMINAL IN, material_thickness: 0.187 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-104-2658, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C13775
NSN: 5330-00-104-2658
FSC: 5330
CAGE: 02614 — CASCADE CORP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
joint_styleVERTICAL JOINT
inside_diameter1.000 INCHES NOMINAL IN
outside_diameter1.375 INCHES NOMINAL IN
material_thickness0.187 INCHES NOMINAL IN
fsc_application_dataCYLINDER ASSEMBLY,LINEAR ACTUATING
outer_edge_thickness0.187 INCHES NOMINAL IN
cross-sectional_shape_stylePLAIN RECTANGULAR, STRAIGHT FACE
NSN5330-00-104-2658
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C13775 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
JOINT STYLE: VERTICAL JOINT
•
RING STYLE: CONCENTRIC
•
CROSS-SECTIONAL SHAPE STYLE: PLAIN RECTANGULAR, STRAIGHT FACE
•
OUTER EDGE THICKNESS: 0.187 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
FSC APPLICATION DATA: CYLINDER ASSEMBLY,LINEAR ACTUATING
•
MATERIAL: UNABLE TO DECODE
•
MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
JOINT STYLEVERTICAL JOINT
RING STYLECONCENTRIC
CROSS-SECTIONAL SHAPE STYLEPLAIN RECTANGULAR, STRAIGHT FACE
OUTER EDGE THICKNESS0.187 INCHES NOMINAL IN
OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
FSC APPLICATION DATACYLINDER ASSEMBLY,LINEAR ACTUATING
MATERIALUNABLE TO DECODE
MATERIAL THICKNESS0.187 INCHES NOMINAL IN
INSIDE DIAMETER1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
853899Interchangeable
interchangeable cross-reference
interchangeable
07-853899Interchangeable
interchangeable cross-reference
interchangeable
A10060Interchangeable
interchangeable cross-reference
interchangeable
10060Interchangeable
interchangeable cross-reference
interchangeable
S1-8-007-H-27Interchangeable
interchangeable cross-reference
interchangeable
L075N/L07558/L07512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C13775?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C13775?
C13775 is a RING,WIPER.
What parts can replace C13775?
There are 30 known substitutes for C13775: 853899, 07-853899, A10060 and 27 more. Substitute compatibility should be verified for your specific system.
Is C13775 still available?
C13775 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C13775

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026