C12277 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

C12277: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 7.875 INCHES NOMINAL IN, overall_length: 13.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

C12277

NSN: 5133-00-228-1364
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 1NEX4 — KENNAMETAL INC. DIV KENNAMETAL INDUSTRIAL PRODUCTS GROUP (USA)

SPECIFICATIONS

material	STEEL OVERALL
point_type	CONVENTIONAL
point_angle	118.0 DEGREES NOMINAL
shank_style	STANDARD TAPER W/TANG
flute_length	7.875 INCHES NOMINAL IN
flute_quantity	2
overall_length	13.500 INCHES NOMINAL IN
special_features	TAPER SHANK LG; FRACTIONAL SIZE 1-15/64
cutting_end_style	GENERAL PURPOSE
nominal_cutting_diameter	1.2344 INCHES IN
cutting_rotation_direction	RIGHT-HAND
specification/standard_data	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN	5133-00-228-1364

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING END STYLE: GENERAL PURPOSE

•

TAPER SHANK SIZE DESIGNATOR: 4 MORSE

•

FLUTE LENGTH: 7.875 INCHES NOMINAL IN

•

NOMINAL CUTTING DIAMETER: 1.2344 INCHES IN

•

CUTTING ROTATION DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STANDARD TAPER W/TANG

TECHNICAL CHARACTERISTICS

CUTTING END STYLE	GENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR	4 MORSE
FLUTE LENGTH	7.875 INCHES NOMINAL IN
OVERALL LENGTH	13.500 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER	1.2344 INCHES IN
CUTTING ROTATION DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STANDARD TAPER W/TANG
FLUTE QUANTITY	2
SPECIAL FEATURES	TAPER SHANK LG; FRACTIONAL SIZE 1-15/64

SUBSTITUTES & CROSS-REFERENCES 8

2410 1-15/64Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

110 1-15/64Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1302Reference document

Same NSN cross-reference

Reference document — Secondary reference

500Reference document

Same NSN cross-reference

Reference document — Secondary reference

310-RTReference document

Same NSN cross-reference

Reference document — Secondary reference

74000Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy C12277?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is C12277?

C12277 is a RESISTOR,VARIABLE,WIRE WOUND,NON.

What parts can replace C12277?

There are 8 known substitutes for C12277: 2410 1-15/64, 110 1-15/64, 1302 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for C12277?

C12277 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1364. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

C12277 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — C12277