PartsTable
Technical Data Sheet
Download PDF

C12167 — PADDING FLANNEL,LAUNDRY PRESS,CO

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

C12167: PADDING FLANNEL,LAUNDRY PRESS,CO.

PADDING FLANNEL,LAUNDRY PRESS,CO. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 3.625 INCHES NOMINAL IN, overall_length: 7.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-189-9316, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C12167
NSN: 5133-00-189-9316
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 60NQ9 — GREENFIELD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length3.625 INCHES NOMINAL IN
flute_quantity2
overall_length7.000 INCHES NOMINAL IN
special_featuresTAPER SHANK LG; FRACTIONAL SIZE 13/32
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.4062 INCHES IN
cutting_rotation_directionRIGHT-HAND
specification/standard_data05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5133-00-189-9316
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PADDING FLANNEL,LAUNDRY PRESS,CO TITLE COMPONENT PN C12167 MFR PADDING FLANNEL,LAUNDR
KEY FEATURES
•
CUTTING END STYLE: GENERAL PURPOSE
•
TAPER SHANK SIZE DESIGNATOR: 1 MORSE
•
FLUTE LENGTH: 3.625 INCHES NOMINAL IN
•
NOMINAL CUTTING DIAMETER: 0.4062 INCHES IN
•
CUTTING ROTATION DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
SHANK STYLE: STANDARD TAPER W/TANG
TECHNICAL CHARACTERISTICS
CUTTING END STYLEGENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR1 MORSE
FLUTE LENGTH3.625 INCHES NOMINAL IN
OVERALL LENGTH7.000 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER0.4062 INCHES IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLESTANDARD TAPER W/TANG
FLUTE QUANTITY2
SPECIAL FEATURESTAPER SHANK LG; FRACTIONAL SIZE 13/32
SUBSTITUTES & CROSS-REFERENCES 8
1302Reference document
Same NSN cross-reference
Reference document — Secondary reference
10026Reference document
Same NSN cross-reference
Reference document — Secondary reference
B94.11MReference document
Same NSN cross-reference
Reference document — Design control — primary reference
53126Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
310-RTReference document
Same NSN cross-reference
Reference document — Secondary reference
41126Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C12167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C12167?
C12167 is a PADDING FLANNEL,LAUNDRY PRESS,CO.
What parts can replace C12167?
There are 8 known substitutes for C12167: 1302, 10026, B94.11M and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C12167?
C12167 is cataloged in the U.S. Government catalog under NSN 5133-00-189-9316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C12167