PartsTable
Technical Data Sheet
Download PDF

C12102-03F10B — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

C12102-03F10B: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_height: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.347 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN, thread_length: 0.533 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, fastener_length: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-243-6556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C12102-03F10B
NSN: 5305-01-243-6556
FSC: 5305 — Screws
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_height0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.347 INCHES MINIMUM AND 0.361 INCHES MAXIMUM IN
thread_length0.533 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
fastener_length0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.125 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-243-6556
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C12102-03F10B · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.533 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.125 INCHES NOMINAL IN
HEAD HEIGHT0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
FASTENER LENGTH0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.533 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
38030E-3C-10P3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
C12102-03F10CReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
38-3-E 3C-10CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C12102-03F10B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C12102-03F10B?
C12102-03F10B is a SCREW,CAP,SOCKET HEAD.
What parts can replace C12102-03F10B?
There are 3 known substitutes for C12102-03F10B: 38030E-3C-10P3, C12102-03F10C, 38-3-E 3C-10C. Substitute compatibility should be verified for your specific system.
What is the NSN for C12102-03F10B?
C12102-03F10B is cataloged in the U.S. Government catalog under NSN 5305-01-243-6556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C12102-03F10B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.