PartsTable
Technical Data Sheet
PartsTable / MRO / C11930-1
C11930-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The C11930-1 is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY AND PLASTIC ACETAL AND STEEL CORROSION RESISTING, overall_width: 5.150 INCHES NOMINAL IN, overall_length: 7.620 INCHES NOMINAL IN, special_features: D-SHAPED CONFIGURATION, surface_treatment: ANODIZE AND CADMIUM AND PASSIVATE, mounting_facility_type_and_quantity: 2 SCREW SINGLE MOUNTING FACILITY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-267-4009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C11930-1
NSN: 5998-01-267-4009
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY AND PLASTIC ACETAL AND STEEL CORROSION RESISTING
overall_width5.150 INCHES NOMINAL IN
overall_length7.620 INCHES NOMINAL IN
special_featuresD-SHAPED CONFIGURATION
surface_treatmentANODIZE AND CADMIUM AND PASSIVATE
mounting_facility_type_and_quantity2 SCREW SINGLE MOUNTING FACILITY
NSN5998-01-267-4009
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN C11930-1 MFR C11930-1
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY AND PLASTIC ACETAL AND STEEL CORROSION RESISTING
•
SURFACE TREATMENT: ANODIZE AND CADMIUM AND PASSIVATE
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 SCREW SINGLE MOUNTING FACILITY
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY AND PLASTIC ACETAL AND STEEL CORROSION RESISTING
SURFACE TREATMENTANODIZE AND CADMIUM AND PASSIVATE
MOUNTING FACILITY TYPE AND QUANTITY2 SCREW SINGLE MOUNTING FACILITY
OVERALL WIDTH5.150 INCHES NOMINAL IN
SPECIAL FEATURESD-SHAPED CONFIGURATION
OVERALL LENGTH7.620 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY AND PLASTIC ACETAL AND STEEL CORROSION RESISTING
SURFACE TREATMENTANODIZE AND CADMIUM AND PASSIVATE
MOUNTING FACILITY TYPE AND QUANTITY2 SCREW SINGLE MOUNTING FACILITY
OVERALL WIDTH5.150 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
5305Upgraded Successor
successor cross-reference
successor
5305-C11930-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy C11930-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C11930-1?
C11930-1 is a C11930-1. It is classified as a MRO (MRO_GENERAL).
What parts can replace C11930-1?
There are 2 known substitutes for C11930-1: 5305, 5305-C11930-1. Substitute compatibility should be verified for your specific system.
What is the NSN for C11930-1?
C11930-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-267-4009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C11930-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026