PartsTable
Technical Data Sheet
Download PDF

C11795-4 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

C11795-4: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.110 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES ALL SURFACES, outside_diameter: 0.244 INCHES NOMINAL IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.028 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-392-6439, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C11795-4
NSN: 5310-01-392-6439
FSC: 5310 — Nuts and Washers
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OVERALL
hole_diameter0.110 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES ALL SURFACES
outside_diameter0.244 INCHES NOMINAL IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.028 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-392-6439
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C11795-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES ALL SURFACES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.244 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OVERALL
•
HOLE DIAMETER: 0.110 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES ALL SURFACES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.244 INCHES NOMINAL IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OVERALL
HOLE DIAMETER0.110 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C11795-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C11795-4?
C11795-4 is a WASHER,LOCK.
What is the NSN for C11795-4?
C11795-4 is cataloged in the U.S. Government catalog under NSN 5310-01-392-6439. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C11795-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.