PartsTable
Technical Data Sheet
Download PDF

C100800-4 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C100800-4: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 17.0 MILLIMETERS NOMINAL MM, overall_width: 12.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-776-0643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C100800-4
NSN: 3110-00-776-0643
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 44541 — MAGNETICS INTL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter17.0 MILLIMETERS NOMINAL MM
overall_width12.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0004 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter40.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
NSN3110-00-776-0643
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C100800-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0004 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 40.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0004 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH12.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER40.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 8
11554Reference document
Same NSN cross-reference
Reference document — Secondary reference
SH-8872 DETAIL 10Reference document
Same NSN cross-reference
Reference document — Secondary reference
416821-02-DReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
18587-10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
77503Reference document
Same NSN cross-reference
Reference document — Secondary reference
108135Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C100800-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C100800-4?
C100800-4 is a BEARING,BALL,ANNULAR.
What parts can replace C100800-4?
There are 8 known substitutes for C100800-4: 11554, SH-8872 DETAIL 10, 416821-02-D and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C100800-4?
C100800-4 is cataloged in the U.S. Government catalog under NSN 3110-00-776-0643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C100800-4