PartsTable
Technical Data Sheet
Download PDF

C10068-3 — BEARING,WASHER,THRUST

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

C10068-3: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include shank_type: THREADED, design_type: SINGLE FOOT, holding_clip: NOT INCLUDED, thread_location: EXTERNAL, special_deflator: NOT INCLUDED, special_features: 70 DEGREE ANGLE AND 0.3125 IN. DIA INTERNAL THREAD IN.

This part is cataloged in the U.S. Government catalog under NSN 4730-01-175-7117, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C10068-3
NSN: 4730-01-175-7117
NIINs: 011757117, 013043543
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
shank_typeTHREADED
design_typeSINGLE FOOT
holding_clipNOT INCLUDED
thread_locationEXTERNAL
special_deflatorNOT INCLUDED
special_features70 DEGREE ANGLE AND 0.3125 IN. DIA INTERNAL THREAD IN
screw_thread_diameter0.438 INCHES NOMINAL IN
screw_thread_series_designatorUNF
NSN4730-01-175-7117
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: C10068-3 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: SINGLE FOOT
•
SHANK TYPE: THREADED
•
HOLDING CLIP: NOT INCLUDED
•
THREAD LOCATION: EXTERNAL
•
SCREW THREAD DIAMETER: 0.438 INCHES NOMINAL IN
•
SCREW THREAD SERIES DESIGNATOR: UNF
•
SPECIAL DEFLATOR: NOT INCLUDED
TECHNICAL CHARACTERISTICS
DESIGN TYPESINGLE FOOT
SHANK TYPETHREADED
HOLDING CLIPNOT INCLUDED
THREAD LOCATIONEXTERNAL
SCREW THREAD DIAMETER0.438 INCHES NOMINAL IN
SPECIAL FEATURES70 DEGREE ANGLE AND 0.3125 IN. DIA INTERNAL THREAD IN
SCREW THREAD SERIES DESIGNATORUNF
SPECIAL DEFLATORNOT INCLUDED
SUBSTITUTES & CROSS-REFERENCES 2
C10068Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
HF300-.3125CReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C10068-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C10068-3?
C10068-3 is a BEARING,WASHER,THRUST.
What parts can replace C10068-3?
There are 2 known substitutes for C10068-3: C10068, HF300-.3125C. Substitute compatibility should be verified for your specific system.
What is the NSN for C10068-3?
C10068-3 is cataloged in the U.S. Government catalog under NSN 4730-01-175-7117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C10068-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.