PartsTable
Technical Data Sheet
Download PDF

C0V1317 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C0V1317: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.530 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ZINC BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-346-3932, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C0V1317
NSN: 5340-00-346-3932
FSC: 5340 — Hardware, Commercial
CAGE: 75272 — KICKHAEFER MANUFACTURING COMPANY, LLC DBA KICKHAEFER MANUFACTURING CO (USA)
SPECIFICATIONS
diameter0.530 INCHES NOMINAL IN
materialSTEEL BAND
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC BAND
material_thickness0.048 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
end_item_identification4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV)
distance_from_loop_center_to_tongue_end1.560 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.030 INCHES NOMINAL IN
NSN5340-00-346-3932
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C0V1317 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.530 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.048 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.560 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.530 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.560 INCHES NOMINAL IN
SURFACE TREATMENTZINC BAND
END ITEM IDENTIFICATION4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV)
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.030 INCHES NOMINAL IN
MATERIALSTEEL BAND
SUBSTITUTES & CROSS-REFERENCES 1
T50103Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C0V1317?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0V1317?
C0V1317 is a CLAMP,LOOP.
What parts can replace C0V1317?
There is 1 known substitute for C0V1317: T50103. Substitute compatibility should be verified for your specific system.
What is the NSN for C0V1317?
C0V1317 is cataloged in the U.S. Government catalog under NSN 5340-00-346-3932. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0V1317

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.