PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C0V0917
C0V0917 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: PLASTIC VINYL CUSHION, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.048 INCHES NOMINAL IN, loop_inside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-150-0873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C0V0917
NSN: 5340-00-150-0873
FSC: 5340
CAGE: 75272 — KICKHAEFER MANUFACTURING COMPANY, LLC DBA KICKHAEFER MANUFACTURING CO (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialPLASTIC VINYL CUSHION
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.048 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.470 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.910 INCHES NOMINAL IN
NSN5340-00-150-0873
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C0V0917 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.470 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.048 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.910 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
DIAMETER: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.470 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.910 INCHES NOMINAL IN
MATERIALSTEEL BAND
DIAMETER0.531 INCHES NOMINAL IN
MATERIALPLASTIC VINYL CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
40138Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 1Interchangeable
interchangeable cross-reference
interchangeable
10170Interchangeable
interchangeable cross-reference
interchangeable
61-84Interchangeable
interchangeable cross-reference
interchangeable
56300Interchangeable
interchangeable cross-reference
interchangeable
E10-09023-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C0V0917?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0V0917?
C0V0917 is a CLAMP,LOOP.
What parts can replace C0V0917?
There are 8 known substitutes for C0V0917: 40138, B94.19 TABLE 1, 10170 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C0V0917?
C0V0917 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-150-0873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0V0917

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026