PartsTable
Technical Data Sheet
Download PDF

C0M5730-36 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

C0M5730-36: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN, thread_length: 1.333 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 1.375 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-453-2608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C0M5730-36
NSN: 5305-00-453-2608
FSC: 5305 — Screws
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
thread_length1.333 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length1.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.189 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
nominal_thread_diameter2.8 MILLIMETERS MM
thread_series_designatorBA
thread_pitch_in_millimeters0.53
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5305-00-453-2608
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C0M5730-36 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
THREAD PITCH IN MILLIMETERS: 0.53
•
THREAD LENGTH: 1.333 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 2.8 MILLIMETERS MM
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.189 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
FASTENER LENGTH1.375 INCHES NOMINAL IN
THREAD PITCH IN MILLIMETERS0.53
THREAD LENGTH1.333 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER2.8 MILLIMETERS MM
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.189 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
SCREW MATERIALSTEEL CORROSION RESISTING
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C0M5730-36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0M5730-36?
C0M5730-36 is a SCREW,MACHINE.
What is the NSN for C0M5730-36?
C0M5730-36 is cataloged in the U.S. Government catalog under NSN 5305-00-453-2608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0M5730-36