PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C0M-27
C0M-27 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: PLASTIC CASE, plate_type: NEGATIVE OR POSITIVE, overall_width: 6.750 INCHES NOMINAL IN, terminal_type: TAPER POST, overall_height: 8.750 INCHES NOMINAL IN, overall_length: 12.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-164-6836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C0M-27
NSN: 5310-00-164-6836
FSC: 5310
CAGE: 50400 — CAR-O-MATIC SALES INC (USA)
SPECIFICATIONS
materialPLASTIC CASE
plate_typeNEGATIVE OR POSITIVE
cell_quantity6
overall_width6.750 INCHES NOMINAL IN
terminal_typeTAPER POST
overall_height8.750 INCHES NOMINAL IN
overall_length12.000 INCHES NOMINAL IN
case_design_typeSEALED
voltage_in_volts12.0
terminal_locationTOP AT EACH END
terminal_quantity2
battery_electrolyteACID
NSN5310-00-164-6836
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: C0M-27 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: TOP BRUSH,2 LOWER SIDE BRUSHES,2 WINDOW BRUSHES,2 UPPER PANEL BRUSHES; ACCOMMODATES VEHICLES 88 IN. HGH,8FT WD; CONTROL PANEL HAS MANUAL PUSH BUTTON CONTROL AND SENSING DEVICES; 40 AMP,3 WIRE,230/115 V,60 HZ,1 PH V
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONTOP BRUSH,2 LOWER SIDE BRUSHES,2 WINDOW BRUSHES,2 UPPER PANEL BRUSHES; ACCOMMODATES VEHICLES 88 IN. HGH,8FT WD; CONTROL PANEL HAS MANUAL PUSH BUTTON CONTROL AND SENSING DEVICES; 40 AMP,3 WIRE,230/115 V,60 HZ,1 PH V
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
C0M-27Interchangeable
interchangeable cross-reference
interchangeable
27-GMF-5Interchangeable
interchangeable cross-reference
interchangeable
WF-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C0M-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0M-27?
C0M-27 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace C0M-27?
There are 3 known substitutes for C0M-27: C0M-27, 27-GMF-5, WF-27. Substitute compatibility should be verified for your specific system.
What is the NSN for C0M-27?
C0M-27 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-164-6836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0M-27

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026