PartsTable
Technical Data Sheet
Download PDF

C082-5-7 — SCREW,MACHINE

✓ Government record, cited
Conceptronic · BOLT SCREW
PRODUCT OVERVIEW

C082-5-7: SCREW,MACHINE.

With this wireless optical travel mouse you have a compact and extremely precise pointing device for your PC and notebook. Thanks to the unique snap-on system, the micro USB receiver can be sticked onto the mouse bottom easily, preventing loss of the USB receiver while traveling. The mouse has a special rubber coating that enhances comfortable grip.

2 x AAA batteries are included. - With 5 control buttons for easy navigation - Ergonomic design - Unique snap-on design for sticking the micro USB receiver onto the mouse bottom This part is cataloged in the U.S. Government catalog under NSN 5305-00-927-7903, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
C082-5-7
NSN: 5305-00-927-7903
FSC: 5305 — Screws
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.630 INCHES NOMINAL IN
thread_length0.351 INCHES MINIMUM IN
screw_materialSTEEL COMP H11
fastener_length0.788 INCHES NOMINAL IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleTORQUE SET
nominal_thread_diameter0.312 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-927-7903
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C082-5-7 · Conceptronic ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.788 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS6485 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.351 INCHES MINIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.788 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.351 INCHES MINIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP H11
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
SFT22-5A7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C082-5-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C082-5-7?
C082-5-7 is a SCREW,MACHINE manufactured by Conceptronic.
What parts can replace C082-5-7?
There is 1 known substitute for C082-5-7: SFT22-5A7. Substitute compatibility should be verified for your specific system.
What is the NSN for C082-5-7?
C082-5-7 is cataloged in the U.S. Government catalog under NSN 5305-00-927-7903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C082-5-7