PartsTable
Technical Data Sheet
PartsTable / MRO / C0608

C0608 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.218 INCHES NOMINAL IN, thread_class: 2A NUT THREAD A, body_diameter: 0.938 INCHES NOMINAL IN, thread_length: 0.875 INCHES MINIMUM AND 1.125 INCHES MAXIMUM NUT THREAD IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-080-2016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C0608
NSN: 5307-00-080-2016
FSC: 5307
CAGE: 25567 — THE GORMAN-RUPP COMPANY DIV GORMAN-RUPP (USA)
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.218 INCHES NOMINAL IN
thread_class2A NUT THREAD A
body_diameter0.938 INCHES NOMINAL IN
thread_length0.875 INCHES MINIMUM AND 1.125 INCHES MAXIMUM NUT THREAD IN
overall_length1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
thread_directionRIGHT-HAND NUT THREAD
terminal_diameter0.032 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES STUD THREAD IN
reliability_indicatorNOT ESTABLISHED
thread_pitch_diameters+0.3365 TO 0.3389 INCHES STUD THREAD IN
NSN5307-00-080-2016
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C0608 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
THREAD DIRECTION: RIGHT-HAND NUT THREAD
•
THREAD LENGTH: 0.875 INCHES MINIMUM AND 1.125 INCHES MAXIMUM NUT THREAD IN
•
THREAD SERIES DESIGNATOR: UNS STUD THREAD
•
THREAD CLASS: 2A NUT THREAD A
•
THREAD PITCH DIAMETERS: +0.3365 TO 0.3389 INCHES STUD THREAD IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1113 ASSN STD SINGLE MATERIAL RESPONSE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
THREAD DIRECTIONRIGHT-HAND NUT THREAD
THREAD LENGTH0.875 INCHES MINIMUM AND 1.125 INCHES MAXIMUM NUT THREAD IN
THREAD SERIES DESIGNATORUNS STUD THREAD
THREAD CLASS2A NUT THREAD A
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD PITCH DIAMETERS+0.3365 TO 0.3389 INCHES STUD THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1113 ASSN STD SINGLE MATERIAL RESPONSE
THREAD QUANTITY PER INCH16 STUD THREAD
THREAD QUANTITY PER INCH16 NUT THREAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
C0608 15991Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C0608?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0608?
C0608 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace C0608?
There is 1 known substitute for C0608: C0608 15991. Substitute compatibility should be verified for your specific system.
What is the NSN for C0608?
C0608 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-080-2016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0608

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026