PartsTable
Technical Data Sheet
Download PDF

C04546-0116-40-2 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C04546-0116-40-2: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.432 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, height: 1.945 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 SLEEVE, closed_length: 16.469 INCHES MINIMUM AND 16.531 INCHES MAXIMUM IN, extended_length: 37.500 INCHES NOMINAL IN, mounting_method: BRACKET(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-031-0677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C04546-0116-40-2
NSN: 5340-01-031-0677
FSC: 5340 — Hardware, Commercial
CAGE: 83508 — HETTICH AMERICA, L.P. (USA)
SPECIFICATIONS
width0.432 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
height1.945 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 SLEEVE
closed_length16.469 INCHES MINIMUM AND 16.531 INCHES MAXIMUM IN
extended_length37.500 INCHES NOMINAL IN
mounting_methodBRACKET(S)
style_designator2 - MEMBER
surface_treatmentANODIZE OVERALL
side_for_which_designedLEFT HAND
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-031-0677
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C04546-0116-40-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 37.500 INCHES NOMINAL IN
•
MOUNTING METHOD: BRACKET(S)
•
STYLE DESIGNATOR: 2 - MEMBER
•
HEIGHT: 1.945 INCHES NOMINAL IN
•
CLOSED LENGTH: 16.469 INCHES MINIMUM AND 16.531 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.432 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH37.500 INCHES NOMINAL IN
MOUNTING METHODBRACKET(S)
STYLE DESIGNATOR2 - MEMBER
HEIGHT1.945 INCHES NOMINAL IN
CLOSED LENGTH16.469 INCHES MINIMUM AND 16.531 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE OVERALL
WIDTH0.432 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 ARM
MATERIALALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 7075 OR ALUMINUM ALLOY 2014 SLEEVE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
41-00197-002Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C04546-0116-40-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C04546-0116-40-2?
C04546-0116-40-2 is a SLIDE,DRAWER,EXTENSION.
What parts can replace C04546-0116-40-2?
There is 1 known substitute for C04546-0116-40-2: 41-00197-002. Substitute compatibility should be verified for your specific system.
What is the NSN for C04546-0116-40-2?
C04546-0116-40-2 is cataloged in the U.S. Government catalog under NSN 5340-01-031-0677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C04546-0116-40-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.