PartsTable
Technical Data Sheet
Download PDF

C029236-1LH — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C029236-1LH: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY 7075 OVERALL, extended_length: 52.969 INCHES MINIMUM AND 53.031 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: ANODIZE OVERALL, side_for_which_designed: LEFT HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-488-4256, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C029236-1LH
NSN: 5340-00-488-4256
FSC: 5340 — Hardware, Commercial
CAGE: 83508 — HETTICH AMERICA, L.P. (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
materialALUMINUM ALLOY 7075 OVERALL
extended_length52.969 INCHES MINIMUM AND 53.031 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentANODIZE OVERALL
side_for_which_designedLEFT HAND
material_document_and_classificationQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-488-4256
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C029236-1LH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 52.969 INCHES MINIMUM AND 53.031 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 7075 OVERALL
•
SIDE FOR WHICH DESIGNED: LEFT HAND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH52.969 INCHES MINIMUM AND 53.031 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
WIDTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 7075 OVERALL
SIDE FOR WHICH DESIGNEDLEFT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
A15302-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C029236-1LH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C029236-1LH?
C029236-1LH is a SLIDE,DRAWER,EXTENSION.
What parts can replace C029236-1LH?
There is 1 known substitute for C029236-1LH: A15302-001. Substitute compatibility should be verified for your specific system.
What is the NSN for C029236-1LH?
C029236-1LH is cataloged in the U.S. Government catalog under NSN 5340-00-488-4256. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C029236-1LH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.