PartsTable
Technical Data Sheet
Download PDF

C017-16 — CAPACITOR,VARIABLE,GLASS DIELECT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

C017-16: CAPACITOR,VARIABLE,GLASS DIELECT.

CAPACITOR,VARIABLE,GLASS DIELECT. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: GLASS ENCLOSURE, body_style: PISTON, body_length: 0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, overall_width: 0.500 INCHES NOMINAL IN, inclosure_type: ENCASED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-150-2645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C017-16
NSN: 5340-00-150-2645
NIINs: 001502645, 005536936
FSC: 5340 — Hardware, Commercial
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialGLASS ENCLOSURE
body_stylePISTON
body_length0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
overall_width0.500 INCHES NOMINAL IN
inclosure_typeENCASED
overall_length0.718 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN
terminal_length0.719 INCHES NOMINAL IN
fragility_factorMODERATELY RUGGED
overall_diameter0.250 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
precious_materialGOLD
NSN5340-00-150-2645
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C017-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.110 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.892 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.110 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.892 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
JM44LCWS16TReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C017-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C017-16?
C017-16 is a CAPACITOR,VARIABLE,GLASS DIELECT. It is classified as a MRO (MRO_GENERAL).
What parts can replace C017-16?
There is 1 known substitute for C017-16: JM44LCWS16T. Substitute compatibility should be verified for your specific system.
What is the NSN for C017-16?
C017-16 is cataloged in the U.S. Government catalog under NSN 5340-00-150-2645. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C017-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.