PartsTable
Technical Data Sheet
PartsTable / O-RING / C0147 3-906
C0147 3-906 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-025-7792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C0147 3-906
NSN: 5331-01-025-7792
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
NSN5331-01-025-7792
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C0147 3-906 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
0J/C29000010Interchangeable
interchangeable cross-reference
interchangeable
AS568-010 3CH915B34EO16EO36Interchangeable
interchangeable cross-reference
interchangeable
AS568BInterchangeable
interchangeable cross-reference
interchangeable
2-016N163-70Interchangeable
interchangeable cross-reference
interchangeable
AS568-016Interchangeable
interchangeable cross-reference
interchangeable
ASTM-D2000-2003AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C0147 3-906?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0147 3-906?
C0147 3-906 is a O-RING.
What parts can replace C0147 3-906?
There are 23 known substitutes for C0147 3-906: 0J/C29000010, AS568-010 3CH915B34EO16EO36, AS568B and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C0147 3-906?
C0147 3-906 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-025-7792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0147 3-906

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026