PartsTable
Technical Data Sheet
PartsTable / MRO / C007
C007 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, head_style: FLAT COUNTERSUNK, body_length: 0.688 INCHES NOMINAL IN, body_diameter: 0.188 INCHES NOMINAL IN, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-224-0147, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ C007
NSN: 5305-00-224-0147
FSC: 5305
CAGE: 87308 — FARLEY METALS INC SOUTHERN SCREW DIV (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
head_styleFLAT COUNTERSUNK
body_length0.688 INCHES NOMINAL IN
body_diameter0.188 INCHES NOMINAL IN
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
fastener_length0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
terminal_length2.125 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 87.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OR ZINC OVERALL
dielectric_materialPLASTIC POLYETHYLENE TEREPHTHALATE (PET)(POLYESTER)
internal_drive_styleCROSS RECESS TYPE 1
NSN5305-00-224-0147
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C007 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC OVERALL
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2C STYLE
•
MATERIAL: STEEL OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 87.0 DEGREES MAXIMUM
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC OVERALL
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2C STYLE
MATERIALSTEEL OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 87.0 DEGREES MAXIMUM
FASTENER LENGTH0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2365Interchangeable
interchangeable cross-reference
interchangeable
552159-103Interchangeable
interchangeable cross-reference
interchangeable
BA-168902-SPEC-KS14141L2Interchangeable
interchangeable cross-reference
interchangeable
MS35492-30Interchangeable
Same NIIN cross-reference
interchangeable
640F185G01Interchangeable
Same NIIN cross-reference
interchangeable
MS35492-530Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C007?
C007 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace C007?
There are 8 known substitutes for C007: 2365, 552159-103, BA-168902-SPEC-KS14141L2 and 5 more. Substitute compatibility should be verified for your specific system.
Is C007 still available?
C007 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026