PartsTable
Technical Data Sheet
PartsTable / O-RING / C004-6
C004-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-966-9138, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C004-6
NSN: 5331-00-966-9138
FSC: 5331 — O-RING
CAGE: 81755 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN AERONAUTICS COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
end_item_identification4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV)
NSN5331-00-966-9138
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C004-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE331 MAXIMUM
END ITEM IDENTIFICATION4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV)
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
2-590RInterchangeable
interchangeable cross-reference
interchangeable
1259Interchangeable
interchangeable cross-reference
interchangeable
002-59030Interchangeable
interchangeable cross-reference
interchangeable
GGG-P-471Interchangeable
interchangeable cross-reference
interchangeable
67-503Interchangeable
interchangeable cross-reference
interchangeable
227Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C004-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C004-6?
C004-6 is a O-RING.
What parts can replace C004-6?
There are 19 known substitutes for C004-6: 2-590R, 1259, 002-59030 and 16 more. Substitute compatibility should be verified for your specific system.
Is C004-6 still available?
C004-6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C004-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026