PartsTable
Technical Data Sheet
Download PDF

C0-0209 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C0-0209: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.025 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-022-3304, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C0-0209
NSN: 5340-01-022-3304
FSC: 5340 — Hardware, Commercial
CAGE: 75272 — KICKHAEFER MANUFACTURING COMPANY, LLC DBA KICKHAEFER MANUFACTURING CO (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.025 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.688 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.438 INCHES NOMINAL IN
NSN5340-01-022-3304
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C0-0209 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.688 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.438 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.281 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.688 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.438 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
66281Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C0-0209?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C0-0209?
C0-0209 is a CLAMP,LOOP.
What parts can replace C0-0209?
There is 1 known substitute for C0-0209: 66281. Substitute compatibility should be verified for your specific system.
What is the NSN for C0-0209?
C0-0209 is cataloged in the U.S. Government catalog under NSN 5340-01-022-3304. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C0-0209

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.