PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C-707
C-707 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DUMMY LOAD,ELECTRICAL is a the manufacturer industrial component. Key specifications include phase: THREE, material: RUBBER SYNTHETIC OVERALL, body_width: 4.120 INCHES MAXIMUM IN, body_height: 3.620 INCHES MAXIMUM IN, power_rating: 1.300 MEGAWATTS PEAK, cooling_method: SELF-COOLED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-429-7644, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-707
NSN: 5340-00-429-7644
FSC: 5340
CAGE: 30418 — THOR POWER TOOL CO SUB OF STEWART-WARNER CO (USA)
SPECIFICATIONS
phaseTHREE
materialRUBBER SYNTHETIC OVERALL
body_width4.120 INCHES MAXIMUM IN
body_height3.620 INCHES MAXIMUM IN
power_rating1.300 MEGAWATTS PEAK
cooling_methodSELF-COOLED
overall_length9.750 INCHES MAXIMUM IN
voltage_rating460.0 VOLTS NOMINAL
mounting_methodCEMENT
frequency_rating60.0 HERTZ NOMINAL
overall_diameter3.625 INCHES NOMINAL IN
special_featuresSINGLE FLAVOR SOFT SERVE ICE CREAM FREEZER; MEETS REQUIREMNTS FOR NAVAL SHIPBOARD USE
NSN5340-00-429-7644
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C-707 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
GRIPPING SURFACE CONDITION: SMOOTH
•
STYLE DESIGNATOR: CYLINDRICAL
•
MOUNTING METHOD: CEMENT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
GRIPPING SURFACE CONDITIONSMOOTH
STYLE DESIGNATORCYLINDRICAL
OVERALL LENGTH5.500 INCHES NOMINAL IN
MOUNTING METHODCEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
219-2234Interchangeable
interchangeable cross-reference
interchangeable
858360Interchangeable
interchangeable cross-reference
interchangeable
2823-33Interchangeable
interchangeable cross-reference
interchangeable
C-707Interchangeable
interchangeable cross-reference
interchangeable
LA-1695-1Interchangeable
interchangeable cross-reference
interchangeable
1049926-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C-707?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-707?
C-707 is a DUMMY LOAD,ELECTRICAL.
What parts can replace C-707?
There are 8 known substitutes for C-707: 219-2234, 858360, 2823-33 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C-707?
C-707 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-429-7644. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-707

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026