PartsTable / O-RING / C-69-272
C-69-272
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 9.699 INCHES MINIMUM AND 9.825 INCHES MAXIMUM IN, center_hole_diameter: 9.454 INCHES MINIMUM AND 9.514 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-641-8942, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
C-69-272
NSN: 5331-00-641-8942 FSC: 5331 — O-RINGCAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 9.699 INCHES MINIMUM AND 9.825 INCHES MAXIMUM IN center_hole_diameter 9.454 INCHES MINIMUM AND 9.514 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-641-8942
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: C-69-272
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 9.454 INCHES MINIMUM AND 9.514 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 9.699 INCHES MINIMUM AND 9.825 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN CENTER HOLE DIAMETER 9.454 INCHES MINIMUM AND 9.514 INCHES MAXIMUM IN OUTSIDE DIAMETER 9.699 INCHES MINIMUM AND 9.825 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
2272 Interchangeable interchangeable cross-reference
interchangeable
MODEL 272 Interchangeable interchangeable cross-reference
interchangeable
4371 Interchangeable interchangeable cross-reference
interchangeable
1006303-1 Interchangeable interchangeable cross-reference
interchangeable
579R089H17 Interchangeable interchangeable cross-reference
interchangeable
164-L Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy C-69-272?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-69-272?
C-69-272 is a O-RING.
What parts can replace C-69-272?
There are 19 known substitutes for C-69-272: 2272, MODEL 272, 4371 and 16 more. Substitute compatibility should be verified for your specific system.
Is C-69-272 still available?
C-69-272 is currently cancelled.
Request a Quote — C-69-272