PartsTable / O-RING / C-69-016
C-69-016
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN, center_hole_diameter: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, cross-sectional_height: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-248-3845, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
C-69-016
NSN: 5331-00-248-3845 FSC: 5331 — O-RINGCAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN center_hole_diameter 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN cross-sectional_height 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN NSN 5331-00-248-3845
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: C-69-016
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CROSS-SECTIONAL HEIGHT: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 0.739 INCHES MINIMUM AND 0.769 INCHES MAXIMUM IN CENTER HOLE DIAMETER 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CROSS-SECTIONAL HEIGHT 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
S604 Interchangeable interchangeable cross-reference
interchangeable
MS35338-8 Interchangeable interchangeable cross-reference
interchangeable
40S33 Interchangeable interchangeable cross-reference
interchangeable
MS29512-16 Interchangeable interchangeable cross-reference
interchangeable
GHN10094-10 Interchangeable interchangeable cross-reference
interchangeable
SR-822A-60-16 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy C-69-016?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-69-016?
C-69-016 is a O-RING.
What parts can replace C-69-016?
There are 21 known substitutes for C-69-016: S604, MS35338-8, 40S33 and 18 more. Substitute compatibility should be verified for your specific system.
Is C-69-016 still available?
C-69-016 is currently cancelled.
Request a Quote — C-69-016