PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C-30A-.005 IN T HK
C-30A-.005 IN T HK ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The C-30A-.005 IN T HK is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-900-2339, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-30A-.005 IN T HK
NSN: 5330-00-900-2339
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberC-30A-.005 IN T HK
NSN5330-00-900-2339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C-30A-.005 IN T HK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE DIAMETER: 3.250 INCHES NOMINAL IN
•
APERTURE DIAMETER: 2.781 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.005 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
HOLE DIAMETER: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
BOLT CIRCLE DIAMETER3.250 INCHES NOMINAL IN
APERTURE DIAMETER2.781 INCHES NOMINAL IN
OUTSIDE DIAMETER3.750 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.005 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
HOLE DIAMETER0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY4
MATERIALPAPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
C30AInterchangeable
interchangeable cross-reference
interchangeable
116176Interchangeable
interchangeable cross-reference
interchangeable
7702610Interchangeable
interchangeable cross-reference
interchangeable
600-1028Interchangeable
interchangeable cross-reference
interchangeable
3371562Interchangeable
interchangeable cross-reference
interchangeable
C-30Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C-30A-.005 IN T HK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-30A-.005 IN T HK?
C-30A-.005 IN T HK is a C-30A-.005 IN T HK.
What parts can replace C-30A-.005 IN T HK?
There are 9 known substitutes for C-30A-.005 IN T HK: C30A, 116176, 7702610 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C-30A-.005 IN T HK?
C-30A-.005 IN T HK is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-900-2339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-30A-.005 IN T HK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026