PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C-3000-13
C-3000-13 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STUD,TURNLOCK FASTENER is a the manufacturer industrial component. Key specifications include diameter: 0.302 INCHES NOMINAL IN, material: STEEL OVERALL, drive_type: SLOTTED, grip_length: 3.396 INCHES MINIMUM AND 3.401 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, end_item_identification: LANE TESTING SUPPLY FLEXUAL STRENGTH TESTER,MODEL 3000. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-616-4788, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-3000-13
NSN: 5325-00-616-4788
FSC: 5325
CAGE: 03487 — ANDREA ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
diameter0.302 INCHES NOMINAL IN
materialSTEEL OVERALL
drive_typeSLOTTED
grip_length3.396 INCHES MINIMUM AND 3.401 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
end_item_identificationLANE TESTING SUPPLY FLEXUAL STRENGTH TESTER,MODEL 3000
turnlock_stud_head_styleFILLISTER
stud_shank_major_diameter0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
turnlock_stud_shank_styleSTUD SHANK
material_accommodated_thickness3.546 INCHES NOMINAL IN
general_characteristics_item_description0 TO 10,000 POUNDS LBS
NSN5325-00-616-4788
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C-3000-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL ACCOMMODATED THICKNESS: 3.546 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
DRIVE TYPE: SLOTTED
•
SURFACE TREATMENT: CADMIUM OVERALL
•
STUD SHANK MAJOR DIAMETER: 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
•
TURNLOCK STUD HEAD STYLE: FILLISTER
•
TURNLOCK STUD SHANK STYLE: STUD SHANK
•
GRIP LENGTH: 3.396 INCHES MINIMUM AND 3.401 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL ACCOMMODATED THICKNESS3.546 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DRIVE TYPESLOTTED
SURFACE TREATMENTCADMIUM OVERALL
STUD SHANK MAJOR DIAMETER0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
TURNLOCK STUD HEAD STYLEFILLISTER
TURNLOCK STUD SHANK STYLESTUD SHANK
GRIP LENGTH3.396 INCHES MINIMUM AND 3.401 INCHES MAXIMUM IN
DIAMETER0.302 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
30-00243-003Interchangeable
interchangeable cross-reference
interchangeable
C91Interchangeable
interchangeable cross-reference
interchangeable
S3300Y-C091Interchangeable
interchangeable cross-reference
interchangeable
PE-120Interchangeable
interchangeable cross-reference
interchangeable
51856Interchangeable
interchangeable cross-reference
interchangeable
C-91 MEDIUMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy C-3000-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-3000-13?
C-3000-13 is a STUD,TURNLOCK FASTENER.
What parts can replace C-3000-13?
There are 9 known substitutes for C-3000-13: 30-00243-003, C91, S3300Y-C091 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C-3000-13?
C-3000-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-616-4788. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-3000-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026