PartsTable
Technical Data Sheet
Download PDF

C-2508-A — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

C-2508-A: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.1250 INCHES NOMINAL IN, alignment_type: RIGID, inner_ring_width: 2.0625 INCHES NOMINAL IN, outer_ring_width: 2.0000 INCHES NOMINAL IN, style_designator: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-443-8125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-2508-A
NSN: 3110-01-443-8125
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 50372 — CARTER MANUFACTURING CO, INC DBA CARTER MANUFACTURING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.1250 INCHES NOMINAL IN
seal_quantity2
alignment_typeRIGID
inner_ring_width2.0625 INCHES NOMINAL IN
outer_ring_width2.0000 INCHES NOMINAL IN
style_designatorAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter3.5000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
NSN3110-01-443-8125
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: C-2508-A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
OUTER RING WIDTH: 2.0000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: AIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 3.5000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
SEAL QUANTITY: 2
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
BORE DIAMETER: 1.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
OUTER RING WIDTH2.0000 INCHES NOMINAL IN
STYLE DESIGNATORAIRFRAME, HARDENED AND GROUND, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER3.5000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
BORE DIAMETER1.1250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
INNER RING WIDTH2.0625 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
211047435Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy C-2508-A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-2508-A?
C-2508-A is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace C-2508-A?
There is 1 known substitute for C-2508-A: 211047435. Substitute compatibility should be verified for your specific system.
What is the NSN for C-2508-A?
C-2508-A is cataloged in the U.S. Government catalog under NSN 3110-01-443-8125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-2508-A