PartsTable
Technical Data Sheet

C-25-5/8 — BEARING UNIT,BALL

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

C-25-5/8: BEARING UNIT,BALL.

The BEARING UNIT,BALL is a the manufacturer industrial component. Key specifications include material: STEEL AND WOOL SEAL, seal_type: LABYRINTH, block_type: FIXED, base_length: 1.5000 INCHES NOMINAL IN, bore_diameter: 0.6250 INCHES NOMINAL IN, housing_width: 5.0000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3130-00-289-6581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-25-5/8
NSN: 3130-00-289-6581
FSC: 3130 — Bearings, Mounted
CAGE: 0SBD3 — MB MFG INC (USA)
SPECIFICATIONS
materialSTEEL AND WOOL SEAL
seal_typeLABYRINTH
block_typeFIXED
base_length1.5000 INCHES NOMINAL IN
bore_diameter0.6250 INCHES NOMINAL IN
housing_width5.0000 INCHES NOMINAL IN
seal_locationBOTH ENDS
alignment_typeSELF-ALIGNING
base_thickness0.5000 INCHES NOMINAL IN
housing_height2.4375 INCHES NOMINAL IN
shaft_end_typeOPEN
style_designatorPILLOW BLOCK, SOLID
NSN3130-00-289-6581
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: C-25-5/8 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL TYPE: LABYRINTH
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION FITTING TYPE: HYDRAULIC
•
ASSEMBLY OVERALL LENGTH: 1.5000 INCHES NOMINAL IN
•
HOUSING HEIGHT: 2.4375 INCHES NOMINAL IN
•
MOUNTING SLOT LENGTH: 0.7500 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MOUNTING HOLE TYPE: SLOTTED
TECHNICAL CHARACTERISTICS
SEAL TYPELABYRINTH
LUBRICATION MATERIALGREASE
LUBRICATION FITTING TYPEHYDRAULIC
ASSEMBLY OVERALL LENGTH1.5000 INCHES NOMINAL IN
HOUSING HEIGHT2.4375 INCHES NOMINAL IN
MOUNTING SLOT LENGTH0.7500 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
MOUNTING HOLE TYPESLOTTED
ROTATING ELEMENT LOCKING METHODDIRECT
SEAL LOCATIONBOTH ENDS
SUBSTITUTES & CROSS-REFERENCES 6
BT424Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3H5-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P3U210HReference document
Same NSN cross-reference
Reference document — Secondary reference
PB221-5-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
06904-3HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
JP1197-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C-25-5/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-25-5/8?
C-25-5/8 is a BEARING UNIT,BALL.
What parts can replace C-25-5/8?
There are 6 known substitutes for C-25-5/8: BT424, 3H5-8, P3U210H and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for C-25-5/8?
C-25-5/8 is cataloged in the U.S. Government catalog under NSN 3130-00-289-6581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-25-5/8