PartsTable
Technical Data Sheet
PartsTable / COMPONENT / C-2145
C-2145 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BLADE,WINDSHIELD WIPER is a the manufacturer industrial component. Key specifications include width: 18.500 MILLIMETERS NOMINAL MM, material: RUBBER SYNTHETIC INSERT, head_style: HEXAGON COUNTERSUNK, head_height: 0.438 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 1.281 INCHES MINIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-424-0559, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-2145
NSN: 5306-00-424-0559
FSC: 5306
CAGE: 35311 — AMERICAN STANDARD INC WESTINGHOUSE AIR BRAKE CO DIV (USA)
SPECIFICATIONS
width18.500 MILLIMETERS NOMINAL MM
materialRUBBER SYNTHETIC INSERT
head_styleHEXAGON COUNTERSUNK
head_height0.438 INCHES NOMINAL IN
thread_class2A A
thread_length1.281 INCHES MINIMUM IN
overall_length508.000 MILLIMETERS NOMINAL MM
fastener_length1.375 INCHES NOMINAL IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
mounting_methodCLIP
thread_directionRIGHT-HAND
countersink_angle111.0 DEGREES NOMINAL
NSN5306-00-424-0559
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: C-2145 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.281 INCHES MINIMUM IN
•
THREAD CLASS: 2A A
•
HEAD STYLE: HEXAGON COUNTERSUNK
•
COUNTERSINK ANGLE: 111.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1035 OVERALL
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH1.281 INCHES MINIMUM IN
THREAD CLASS2A A
HEAD STYLEHEXAGON COUNTERSUNK
COUNTERSINK ANGLE111.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1035 OVERALL
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
SPECIAL FEATURESCHAMFER ON THREADED END 0.125 IN. BY 30 DEG IN
THREAD DIRECTIONRIGHT-HAND
FEATURES PROVIDEDFINISHED HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
12417656-001Interchangeable
interchangeable cross-reference
interchangeable
91-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy C-2145?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-2145?
C-2145 is a BLADE,WINDSHIELD WIPER.
What parts can replace C-2145?
There are 2 known substitutes for C-2145: 12417656-001, 91-20. Substitute compatibility should be verified for your specific system.
Is C-2145 still available?
C-2145 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-2145

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026